Concrete floor installation in Placentia CA - a slab ready for your new flooring
Floor cracked, uneven or letting moisture up into your flooring? We pour a flat, well-prepped slab that's ready for what goes on top.
Concrete floor installation in Placentia means we form, pour and finish a flat slab that becomes the floor itself or the base for the flooring you lay on top. Most calls start with an old slab that's cracked, sunk or letting moisture ruin the flooring, or with a new room that needs a floor, sometimes with concrete steps up to the door.
The first thing I ask is what's going on top, since tile, wood or carpet changes how we prep under the slab. The price mostly moves with the floor's size, how much base work it needs, whether it gets steel and what goes under it for moisture. The schedule turns on cure and drying time, which we build into the plan so your flooring goes down on a slab that's ready. I'll measure and put your figure in writing.
What goes into a concrete floor we install
- A dug-out, packed base. We dig out to firm ground and pack the subgrade, the layer the slab sits on, so the floor doesn't settle along with loose dirt.
- Forms and steel. We set the forms to the height your flooring needs and place rebar, steel bars that hold the slab together and keep cracks tight.
- Joints cut on time. We cut control joints, shallow grooves that give the slab a planned place to crack, early enough that cracks land there and not across the room.
- You deal with me. I come out to give the estimate, and our own crew does the work with me on site. We've been in business since 2021, after my years pouring slabs on housing tracts.
- Licensed and insured in California. We're licensed and insured. California's state licensing board licenses concrete contractors, the trade that forms, pours and finishes flat concrete work like a floor slab.
What goes wrong with concrete floors
| Problem | What it looks like | Usual fix |
|---|---|---|
| Settled slab | What it looks like: Floor dips, sounds hollow or cracks open along the walls | Usual fix: Break out, pack a new base, pour again |
| Moisture coming through | What it looks like: Tile lifting, wood cupping, musty carpet or white powder on concrete | Usual fix: New slab with a vapor barrier right underneath |
| Cracks in odd places | What it looks like: Long cracks running across the room instead of along the joints | Usual fix: Control joints cut on time in the new pour |
| Weak, dusty surface | What it looks like: Top powders, chips or wears through where furniture sits | Usual fix: New slab finished and cured the right way |
Repair the floor or pour new
- Patch and grind. Suits a slab that's sound underneath with a few cracks or high spots, so we fill the cracks and grind it flat for the new flooring.
- Cut out and repour. Suits one sunken or broken area, so we saw it out, fix the base under it and pour back level with the rest.
- New slab. Suits a floor that's settled all over or lets moisture through, and it's what I'd pick when the base is the problem, since patches won't fix that.
How your floor job runs
- I come out. You call, and I come out to see the spot, measure it and talk over the room and the flooring with you.
- Written estimate. You get a written estimate that spells out the base work, the slab and what goes under it, so you know what we're doing and why.
- Permit and inspections. If the city has to sign off, we handle the application and line it up before anything gets dug up. Placentia doesn't do same-day inspections, so we call each one in ahead of time.
- Pour day. Our crew protects your house and yard, then pours, finishes and cuts the joints, cleaning up as we go.
- Walkthrough. I walk the finished floor with you and go over the cure, so you know when it's ready for furniture and flooring.
Looking after your floor after the pour
A floor stays flat because of the base nobody sees after the pour, so if something in the budget has to give, I'd trim the finish before I'd skimp there. After that, give the slab its cure time and keep heavy loads off until it's ready.
We're based in Placentia and work across the city and the cities around it, including Fullerton and Yorba Linda, mostly for families who want someone careful in their house. If you'd like a concrete pool deck while we're out, ask about that too, and call for an estimate.
Tell us about your floor
Send the floor size, the flooring you're planning and the address, and we'll get back to you within one business day to set up a visit.
(714) 798-2825- Free estimate at your home
- Everything put in writing
- No pressure to book
Concrete floor questions we hear
How much does a concrete floor cost in Placentia, CA?
A concrete slab in Orange County usually costs about $7 to $17 per square foot, and residential floors here usually run four to six inches thick. Reinforced slabs cost a little more than plain ones, and that range leaves out staining or stamping. I'll measure and give you your own figure in writing.
Who signs the permit application for a concrete floor in Placentia?
The property owner, a California licensed contractor or an authorized agent signs Placentia's building permit application, and an agent needs a notarized letter of authorization. A contractor also shows a state contractor's ID card, proof of workers' comp unless working alone, and a city business license number. We handle it for you.
How soon can I walk on a new concrete floor?
You can usually walk on a new slab within 48 hours, and it's safest to wait a week before moving heavy furniture or equipment onto it. Concrete takes a month to fully cure, which is the slow hardening that gives the floor its strength.
Does tile or wood flooring need moisture protection under the concrete?
Yes, industry guidance says a slab needs moisture protection when it'll be covered with carpet, tile, wood or other flooring. A floor guide finds a vapor barrier laid right against the slab protects floor coverings best. After curing, the slab should dry and be tested before flooring goes down, so we build that time into the plan.
Will a new concrete floor in Placentia crack like my old one?
A few cracks can show up, and a concrete floor guide calls random cracks in up to 3 percent of slab panels reasonable. Panels are the sections between saw cuts or joints, which is why we cut joints on time so cracks stay where they're meant to.